Hi! My question is, how to control the GPIO pins of the NanoPC-T1 board under linux? Other question is, are there any GPIO pins on the NanoPC-T1, which are 5V tolerant and can output 5V, or all of them are 3.3V? Thanks in advance. Ati
I'll try to describe it soon on: http://nel.novelelectronics.pl/wspolpraca/nanopc/nanopc-articles/107-gpi... Generally SENSOR GPIOs should be 5V tolerant. Generally all unbuffered GPIOs are 1.8V not 3.3V. Please check schematic for more details.
Mr. Fragger Can you tell me how to access spi ports in nanopc t1..
Hello, I have a nanoPC-T1 and want to control the digital inputs and control of the COM port (UART) Thanks Luis Zavaleta