Cannot telnet when use 3G on tiny210V2

Hi everybody,

I'm using tiny210V2, I have a 3G module that can be connected to kit via
PCI slot, I used "3G Dial-up" program (default program when installed Linux
on kit) and I can connect to internet ok. But when connected to internet, I
couldn't telnet to kit via LAN port. The leds on LAN port stopped to blink.

Does anyone know how to solve it ? Thank you very much !

you use cross cap. becaus 2 dev different

Hi LBN,

Thanks for your reply, in normally, if I don't use 3G, I can telnet to kit
via LAN port, but when start to turn on 3G, I cannot telnet to kit via LAN
port any more, so I think the problem isn't in cross cap.